FT240X
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This is the documentation page for the FT240X breakout board.
overview
The FT240X breakout board has an USB connector, one 20-pin IO connector. The brains of the PCB, of course, is an FT240X chip.
External resources
pinout
The 20-pin connector is connected as follows:
5V | 3V3 |
VCCIO(jumpered) | DATA0 |
DATA1 | DATA2 |
DATA3 | DATA4 |
DATA5 | DATA6 |
DATA7 | RXF# |
TXE# | RD# |
WR# | SI/WU# |
CBUS5 | CBUS6 |
GND | GND |
LEDS
- The only LED is a power LED
Jumper settings
- The only jumper Is for selecting the I/O voltage. 1-2 = 1V8, 2-3 = 3V3.
future hardware enhancements
Changelog
1.1
- Initial public release