FT230X
Jump to navigation
Jump to search
This is the documentation page for the FT230X breakout board.
overview
The FT230X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT230X chip.
External resources
pinout
The 12-pin connector is connected as follows:
| 5V | 3V3 |
| RTS# | RXD |
| TXD | CTS# |
| CBUS3 | CBUS2 |
| CBUS1 | CBUS0 |
| GND | GND |
LEDS
- The board is equipped with a power-LED, an Rx-LED and a Tx-LED
Jumper settings
No jumpers this time :)
future hardware enhancements
Changelog
1.1
- Initial public release