View source for FT230X

This is the documentation page for the FT230X breakout board. 

== overview ==

The FT230X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT230X chip.

== External resources ==

* [http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT230X.pdf Datasheet]
* [http://www.ftdichip.com/Products/ICs/FT230X.html FTDI product page]

== pinout ==

The 12-pin connector is connected as follows:

<table border=1>
<tr><td>5V</td><td>3V3</td></tr>
<tr><td>RTS</td><td>RXD</td></tr>
<tr><td>TXD</td><td>CTS</td></tr>
<tr><td>CBUS3</td><td>CBUS2</td></tr>
<tr><td>CBUS1</td><td>CBUS0</td></tr>
<tr><td>GND</td><td>GND</td></tr>
</table>

== LEDS ==

* The board is equipped with a power-LED, an Rx-LED and a Tx-LED

== Jumper settings ==

No jumpers this time :)

== future hardware enhancements ==



== Changelog ==

1.1
* Initial public release